Memory Channels View; Start & Stop Sequence View - Kemppi MasterTig 325DC Operating Manual

3.3.3 Memory channels view

Memory channel is a place to store predefined welding parameter settings for future use. A welding machine can
include a number of preset and user-defined channels.
To browse through channels and select channels:
1. Go to the Channels view.
2. Turn the control knob (1) to switch between channels. The highlighted channel is automatically selected.
To save or delete channels:
1. Turn the control knob (1) to highlight a channel.
2. Open the channel actions menu by pressing the control knob button (1). The available actions are shown: Cancel,
Save changes, Save to and Delete.
3. Select an action with the control knob (1).
3.3.4 Start & stop sequence view
The parameters diagram view makes base parameter identification and setting easy. From pre-gas time to post-gas time
and everything in between, you can quickly select and adjust the needed parameter value.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
43
Operating manual - EN
1920900 / 2215