Kemppi MasterTig 325DC Operating Manual page 41

All these parameters can still be modified as per normal for the actual welding.
Weld Assist gives you a recommendation for these:
• Shielding gas flow: "Argon" + l/min and "Helium" + l/min
• Electrode: Diameter
• Filler (if used): Material and diameter
• Number of passes: Number and/or visualization
• Travel speed: mm/min.
Using Weld Assist with MMA welding
1. Go to the Weld Assist view and select 'Start' with the control knob button.
2. Select:
>> The electrode type: Fe-Basic / Fe-Rutile / High Eff. / Ss (stainless steel)/Inox.
>> The electrode diameter (1.6 ... 6 mm).
>> The welding joint type: butt joint / corner joint / lap joint / fillet joint / tube joint / tube+plate joint.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
41
Operating manual - EN
1920900 / 2215