Kemppi MasterTig 325DC Operating Manual page 34

Parameter
Time counter (since date)
Reset counter
4T trigger logic
Advanced settings (hidden in standard view):
Parameter
Current limit min
Current limit max
Balance min
Balance max
Lift TIG current
Cooler flow watch
Positive ignition current
Negative ignition current
Ignition current
Positive ignition time
Negative ignition time
Ignition time
Slight upslope
Startup level
Downslope cut level
2T downslope cut
Nonlinear downslope
Current freezing
AC phase swap current
Info
Software version
Factory reset
* Current range adjustable by welder in TIG welding:
© Kemppi
Value
Total arc time and power on time since
last reset
Time counter reset
4T MLOG / 4T LOG / 4T LOG+ (Default =
4T MLOG)
Value
TIG: 2 A / MMA: 8 A, step 1 A *
TIG: power source's nominal value /
MMA: power source's max. MMA current,
step 1 A *
-99 % ... 0 % (Default = -60 %)
0 % ... 20 % (Default = 0 %)
5 A ... 40 A / Auto (Default = Auto)
OFF / ON (Default = ON)
30 % ... 150 % / Auto, step 1 % (Default =
Auto)
(AC/DC): 100 % ... 300 % / Auto, Step 1 %
(Default = Auto)
(DC): 100 % ... 300 % / Auto, step 1 %
(Default = Auto)
0 ms ... 50 ms / Auto, step 10 ms (Default
= Auto)
(AC/DC): 0 ms ... 950 ms / Auto, step 10
ms (Default = Auto)
(DC): 0 ms ... 950 ms / Auto, step 10 ms
(Default = Auto)
OFF / ON (Default = OFF)
5 % ... 40 %, step 1 % (Default = 10 %)
5 % ... 40 %, step 1 % (Default = 10 %)
OFF / ON (Default = OFF)
0 % ... 50 %, step 1 % (Default = 0 %)
OFF / ON (Default = OFF)
5 A ... 20 A / Auto
Machine type, serial number
Power source and control panel software
version number
Cancel / Reset (Default = Cancel)
34
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
Note
Note
Resets to TIG, DC-, 50 A, HF, Pulse OFF
(other values as per default). Once the
factory reset is complete, the power
source must be restarted manually.
1920900 / 2215