Valve Use; Valve Connection Piping; Installation Position; Valve Connections - Pentair SUDMO P740 Operating Instructions Manual

12.3.

Valve use

Application:
Use:
Shut-off tightness:


13.1.

Installation position


Preferred installation position:
If the installation position is horizontal, increased wear and tear should be expected depending
on the operating conditions.
13.2.

Valve connections

Connections:
For welding instructions, refer to the "Welding and Mounting Instructions" chapter.
13.3.

Installation details for disk type non-return valves


Disk type non-return valve as per the assembly instructions.

Weld or mount the disk type non-return valve into the pipeline.
Welding instruction



Assembly instructions


For assembly instructions, refer to the "Disassembly - Assembly" chapter.
0
20 / 34
Copy of the original operating instructions
BAA RV Solid
Type: P740, P741, P745, P750 and P760
DN 010 – 150, OD 0.50" – 6.00", ISO 008 – 125
disk type non-return valve
hygienic processes
10 bar (145 psi) max.
Information/notice
If the column of water is less than 2 m in height (0.2 bar pressure), this may result in a
slight leak from the seal seat of the valve.
Please refer to the "Disassembly - Assembly" chapter for details of how to carefully
mount the O-ring.
13.

Valve connection piping

vertical
Information/notice
- Welding end
 Detachable connection required for maintenance
- Threaded connection
- Clamp connection
- Small-flange connection
Information/notice
Dismantle the seals before welding.
Shrink-wrap valve body free from tension and distortions.
Welding work must only be carried out by qualified skilled personnel (DIN EN ISO 9606-
1 W8).
No foreign matter must remain in the pipeline when the valves are assembled.
Operating Instructions
Disk type non-return valves
RV Solid series
en