Function Tests - Skyjack SJ85 AJ Service Manual

Function Tests

1.7 Function Tests
Function tests are designed to discover any
malfunctions before the MEWP is put into service. The
operator must understand and follow the step-by-step
instructions to test all MEWP functions.
IMPORTANT
Never use a malfunctioning MEWP . If malfunctions
are discovered, the MEWP must be tagged and
placed out of service. Repairs to the MEWP may
only be made by a qualified service technician.
Prior to performing the function tests, be sure
▪
to read and understand the "Start Operation"
section of the operating manual.
For the function test that are to be performed,
▪
please refer to the operating manual that
corresponds to the correct serial number.
Found there are detailed instructions for which
tests to perform, as well as how to properly
and successfully perform them.
After repairs are completed, the operator must
▪
perform a pre-operation inspection and a
series of function tests again before putting the
MEWP into service.
NOTE
The all-function motion alarm should sound
while operating any boom and drive
function.
SJ85 AJ
Section 1 – Scheduled Maintenance
229044ADA
29