Table of Contents
Advertisement
Scheduled Maintenance Inspections
Emergency Power Unit
7
Make sure there are no loose or missing parts.
▪
Make sure there are no loose wires or missing
▪
fasteners.
Make sure there is no visible damage.
▪
Make sure all the fittings and hoses are
▪
correctly tightened and there are no hydraulic
leaks.
Fuel Tank and Lines
8
IMPORTANT
Before you use the MEWP , make sure there is
sufficient fuel for the estimated task.
DANGER
Explosion or fire hazard. Do not smoke near the
fuel system. If you do not obey, there is a risk of
death or serious injury.
Make sure that the fuel filler cap closes tightly.
▪
Make sure there is no visible damage to the
▪
tank, gauge, hoses, or fittings.
Make sure there is no indication of fuel
▪
leakage from the tank, gauge, hoses, fittings,
pump, and filter.
SJ85 AJ
(B)
(B)
Section 1 – Scheduled Maintenance
8
7
WARNING
Environmental hazard. Immediately remove
gasoline, diesel fuel, engine oil, and hydraulic
fluid spills and leaks with rags. Discard these
rags in accordance with national, state/provincial/
territorial, and local regulations. Spilled fluids can
damage the environment. When spilled fluids go
into the water (for example, a sewage system,
streams, rivers, or other surface water), they can
kill aquatic life.
229044ADA
23
Advertisement
Table of Contents
