Section 1 – Scheduled Maintenance
4
1
5
Base weldment
(B)
1
Make sure there are no visible cracks in
▪
welds or structure and there are no signs of
deformation.
Rotary manifold
(B)
2
Make sure all hoses are correctly tightened
▪
and there is no sign of hydraulic leakage.
Turret rotation gear
3
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
C - Annual Inspection
For the lube procedure, refer
▪
Axles
(B,C)
4
Make sure the front and rear axles are
▪
correctly attached.
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
▪
are tight.
Make sure there is no sign of hydraulic
▪
leakage.
C - Annual Inspection
Check the brakes annually. Refer to the
▪
procedure
5.9-6 Brake Inspection.
229044ADA
24
2
(B,C)
7
3
6
Brakes
(B)
5
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hoses are
▪
correctly tightened and there are no hydraulic
leaks.
Steer cylinder
(B)
6
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hoses are
▪
correctly tightened and there are no hydraulic
leaks.
Steer linkage
(B)
7
Make sure there are no loose or missing parts.
▪
Make sure the tie rod end studs are locked
▪
and there is no visible damage.
Scheduled Maintenance Inspections
4
SJ85 AJ