Honeywell Excel 100C Manuals

Table of contents

• • 3

    Table of Contents
  • 5

    Revision Overview

• 6

  Introduction

  • 6

    General Safety Instructions
  • 6

    Technical Requirements
  • 6

    Auxiliary Devices
  • 7

    Device Assembly and System Installation
  • 7

    Assembly of Controller Housing
  • 8

    Control Cabinet Installation
  • 9

    Meaning of Control Lamp
  • 10

    Terminal Assignment Overview for Excel 100C
  • 11

    General Remarks about Electrical Connections
  • 11

    Cable Routing
  • 11

    Shielding of Sensor and Actuator Cables
  • 12

    Shielding of Data Transmitting Cables (System Bus and Operator Interface)

• 12

  System Ground

  • 12

    RFI Suppression
  • 13

    Cable Lengths and Cross Sectional Areas
  • 14

    Line Power Supply

• 14

  Communication

• 16

  Electrical Connection

  • 18

    Terminal Assignment for Digital Inputs
  • 19

    Terminal Assignment for Relay Modules
  • 21

    Terminal Assignment for Relays and Actuators
  • 22

    Connection of Alarm Relays
  • 22

    Normally Open/Normally Closed Attribute
  • 23

    System Bus (C-bus)
  • 24

    Connections to Operating Device

• 30

  Remote Communications

  • 31

    Modem or ISDN* Terminal Adapter Connections
  • 31

    Modem Requirements
  • 31

    No Set-Up for Standard Modem Behavior
  • 32

    Automatic Baud Rate Synchronization
  • 32

    Auto / Manual Answer Detection
  • 32

    Resetting the Modem
  • 32

    Set-Up for Special Modem Behavior
  • 32

    Set-Up for In-house Telephone Systems
  • 33

    Set-Up for Limited Communication Speed
  • 33

    Troubleshooting
  • 33

    Tcp/ip Dial-up Via Tcp/ip Modem Xm500
  • 34

    Gsm Communication (europe, Only)
  • 34

    M20T Safety Precautions
  • 35

    Required Third-Party Equipment
  • 37

    GSM Antenna Installation

• 37

  M20 Terminal Set-Up

• 39

  Backlight

• 40

  Dimensions

• 42

  U.s. Specifications

  • 42

    Electrical Connection of Sensors

• 44

  Cables

• 44

  Transformers

• 45

  Relays

• 45

  Repeaters

• 46

  European Specifications

  • 46

    Electrical Connection of Sensors

• 49

  Cables

• 49

  Relays

• 49

  Transformers

• 50

  Repeaters