Table of Contents
Advertisement
IPC960A/IPC962A/IPC964A Series User's Manual
Step 4
Locate the PCI or PCIe slots and remove the slot bracket from the slot in which you want to
add the card.
Step 5
Align the PCI or PCIe card with the slot, press the card into the slot until it is firmly seated and
screw it. Then, plug the power cable in connector if needed as instructed below in red.
IPC962A
Note: The power cable will be needed when the graphics card power is over 75W.
Step 6
Please take the holder bracket and screws from the accessory box. Fasten the below bracket
in chassis with standard height (116.38mm) add-on cards.
52
→
IPC964A
Hardware Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC960A Series and is the answer not in the manual?
Questions and answers