Alarms & Troubleshooting; Led Pump Alarm Indicator Lights; Alarms; How To Temporarily Silence The Alarm - Cardinal Health Kangaroo Omni 385400 Instructions For Use Manual

Alarms & Troubleshooting

LED Pump Alarm Indicator Lights

Alarms

How to Temporarily Silence the Alarm

Kangaroo OMNI™ Enteral Feeding Pump status LED Indicator lights on
the upper right of the pump screen provide a quick visual indication of
Kangaroo OMNI™ Enteral Feeding Pump status.
Solid Green = Pump Running
Blinking Green = Ready
Solid Yellow = Information
Blinking Yellow = Notification
Blinking Red = CRITICAL ALARM
See the information below for detailed descriptions of each warning. If an
unexpected operation or event occurs while using Kangaroo OMNI™ Enteral
Feeding Pump, please report any findings to Customer Service.
WARNING: Ensure audio output opening is unobstructed during
normal operation.
All alarms are intended to be heard by operators within range of the alarm
speaker. The speaker is located on the back of Kangaroo OMNI™ Enteral
Feeding Pump, and is designed to be heard within the patient's room. The
display and LED alarm indicators are intended to be seen by an operator
facing the front of Kangaroo OMNI™ Enteral Feeding Pump.
The alarms cannot be permanently silenced or muted. However, by
pressing the Silence Alarm button, the alarm audio will be temporarily
silenced for two minutes. After two minutes, the alarm audio will restart.
To re-engage the audio alarm before the two minutes is up, press the
Bell button. This will end the temporary audio pause, and restart the
audible alarm.
46