Kangaroo Omni™ Enteral Feeding Pump Setup; Turn On Kangaroo Omni™ Enteral Feeding Pump; Select Kangaroo Omni™ Enteral Feeding Pump Settings - Cardinal Health Kangaroo Omni 385400 Instructions For Use Manual

System Setup
2
3
Kangaroo OMNI™ Enteral Feeding Pump SETUP
1
2. Select Kangaroo OMNI™ Enteral Feeding Pump Settings
Note: The Prior Settings screen will appear if the pump was previously configured. Otherwise, the Load Set
screen will be shown.
Keep the previous rate/feed settings:
2a
A
2. Attach the Pole Clamp to Kangaroo OMNI™ Enteral Feeding Pump
A. Use the screw provided to attach the pole clamp to the back of
Kangaroo OMNI™ Enteral Feeding Pump. The pole clamp can be
attached in a horizontal or vertical orientation.
Optional: Place the power cable into the channel on the back of
Kangaroo OMNI™ Enteral Feeding Pump. This will ensure the power
adapter stays with Kangaroo OMNI™ Enteral Feeding Pump once the
pole clamp is attached.
Note: If you are using the adjustable pole clamp accessory, refer to Cap
Storage and Pole Clamp Setup section for instructions.
3. Attach the Pole Clamp and Kangaroo OMNI™ Enteral Feeding Pump
to the IV Pole
CAUTION: When attaching Kangaroo OMNI™ Enteral Feeding Pump to
the IV pole, take precautions to ensure the IV pole remains stable while
in use.
A. Place the inside elbow of the clamp against IV pole.
B. Turn the purple knob clockwise until secure.
1. Turn On Kangaroo OMNI™ Enteral Feeding Pump
Press the Power button to turn on Kangaroo OMNI™ Enteral
A.
Feeding Pump.
Note: The language selection screen will appear the first time
Kangaroo OMNI™ Enteral Feeding Pump is powered on.
Press the Keep Settings button.
A.
17