Service And Maintenance Point; Every 10 Hours Of Operation (Daily); Every 50 Hours Of Operation (Weekly); After The First 50 Hours Of Operation - Fayat Group DYNAPAC CA25 Instruction Manual

Pos. in fig Action
Before starting up for the first time on that day
13 Check the scraper setting
1 Check for free circulation of cooling air
35 Check coolant level
3 Check the engine oil level
28 Refuel
5 Check the hydraulic reservoir level
Test the brakes
17 Grease the steering cylinder bearings
Pos. in fig Action
Check that hoses and couplings are not leaking
4 Inspect/clean the filter element in the air cleaner
16 Lubricate the articulation
17 Check that the guiding cylinders are tight
19 Check the wheel-nuts are tightened
20 Check the tire pressure
Check the air conditioning
Pos. in fig Action
8 Change the hydraulic fluid filter
21 Change oil in rear axle differential
22 Change oil in the rear axle planetary
gearing
10-03-2022
Maintenance – Planned maintenance

Service and maintenance point

Check the Dobbs meter on the machine to know
what type of maintenance is needed.

Every 10 hours of operation (Daily)

Refer to the contents to find the page number of
the sections referred to !

Every 50 hours of operation (Weekly)

Refer to the contents to find the page
number of the sections referred to!

After the FIRST 50 hours of operation

Refer to the contents to find the page
number of the sections referred to !
4812331840EN
Comment
Refer to the engine manual
Refer to the engine manual
Comment
Replace as required
Optional
Comment
79