Table of Contents
Advertisement
Weight: refer to the hoisting plate on the
roller
1
2
3
Figure. Roller lifted with jack
1. Lifting plate
2. Jack
3. Marking
2
Fig. Steering joint lock, open
1. Lock handle
2. Locking dowel
90
Lifting the roller with jack:
You are recommended to lift the machine with a jack
or similar positioned at the marking (3) and/or at
alternative locations as illustrated. Lifting at any other
place can result in damage to the machine or personal
injury.
Regarding the drum frame, axle stands can be placed
along the entire side plates and cross members if
necessary.
Unlocking the articulation
Lift lock in the handle while turning it counterclockwise.
Make sure lock gets in position on the dowel by trying
1
to turn the handle clockwise or counterclockwise
without lifting the lock.
Towing/Recovering
The roller can be moved up to 300 meters (330 yards)
using the instructions below.
4812163801.pdf
The machine's gross weight is specified on the
The machine's gross weight is specified on the
hoisting plate (1). Refer also to the Technical
hoisting plate (1). Refer also to the Technical
specifications.
specifications.
The lifting device such as a jack (2), or
The lifting device such as a jack (2), or
equivalent, must be dimensioned according to the
equivalent, must be dimensioned according to the
safety regulations for lifting devices.
safety regulations for lifting devices.
Do not go under a lifted load! Make sure that the
Do not go under a lifted load! Make sure that the
lifting device is secure in its position, and on a
lifting device is secure in its position, and on a
level and stable suface.
level and stable suface.
Remember to restore the steering joint lock on the
Remember to restore the steering joint lock on the
steering joint to open before operating.
steering joint to open before operating.
Miscellaneous
2019-04-30
Advertisement
Table of Contents
