ELECTRICAL COMPONENTS: GASOLINE
VEHICLES
FUSE
ATC-style fuses are located inside the electrical component box near the battery.
ATM-style fuses are located on the main wire harness in front of the engine.
FUSE REMOVAL
1.
Disconnect the battery.
2.
ATC Fuse Only: Remove electrical component box cover cover.
ATM Fuse Only: Remove fuse holder cover.
3.
Remove the fuse from the fuse block.
FUSE INSTALLATION
1.
Install the fuse. See following WARNING.
WARNING
• If a fuse is blown, determine the cause of the failure and make necessary repairs before installing a
new fuse. Use the appropriately rated fuse; if a fuse with a higher amp rating is used, damage to the
vehicle electrical system may occur.
2.
ATC Fuse Only: Install the snap-on electrical box cover by pressing down firmly on all corners and install
the screw, tightening to 18 in·lb (2 N·m).
ATM Fuse Only: Install the fuse holder cover.
3.
Connect the battery.
2019 Carryall 500 and 700 Maintenance and Service Manual
19
Fuse
Page 19-29