Table of Contents
Advertisement
19
Starter/Generator
3033C
Figure 19-1 Starter/Generator Wiring
4.
Loosen the pivot nuts (1) and pivot bolts (2) (Figure 19-2, Page 19-2).
2997B
Figure 19-2 Starter/Generator Removal
5.
Remove the adjustment nut (3), washer (4) and adjustment bolt (5).
6.
Lower the starter/generator and remove the belt (6) from the pulley.
7.
Support the starter/generator so that when the pivot bolts are removed the starter/generator will not fall.
8.
Remove the pivot nuts and bolts from the mounting bracket.
9.
Remove the starter/generator.
DISASSEMBLY OF THE STARTER/GENERATOR TO SERVICE THE BRUSHES
1.
Remove the two bolts (20) and pull commutator end cover (23) free of starter/generator housing (24) (Figure
19-3, Page 19-3). See following NOTE.
Page 19-2
2019 Carryall 500 and 700 Maintenance and Service Manual
ELECTRICAL COMPONENTS: GASOLINE
VEHICLES
Advertisement
Table of Contents
Troubleshooting
