Table of Contents
Advertisement
19
Fuse
001014-004
Figure 19-36 Solenoid Screws
3.
Pedal-Start Vehicle:
3.1.
Connect the 4 gauge white wire, 18 gauge white wire, and the 18 gauge red wire to the large post.
3.2.
Connect the 4-gauge red wire, 10-gauge red wire, and 16-gauge orange wire to the other large post
on the solenoid.
4.
Key-Start Vehicle:
4.1.
Connect the 4 gauge white wire, 18 gauge white wire, 10 gauge white wire, and the 18 gauge red wire
to the large post.
4.2.
Connect the 4-gauge red wire, 10-gauge red wire, 10 gauge red wire, and 16-gauge orange wire to the
other large post on the solenoid.
5.
Connect the 18 gauge orange wire to the small post on the solenoid.
6.
Connect the 18 gauge blue wire to the other small post on the solenoid.
7.
Install the nuts on the large solenoid posts. Tighten the nuts to 60 in·lb (6.8 N·m).
8.
Install the nuts on the small solenoid posts. Tighten the nuts to 22 in·lb (2.5 N·m).
9.
Install the electrical box cover.
10.
Connect the battery and spark plug wire.
FUSE
ATC-style fuses are located inside the electrical component box near the battery.
ATM-style fuses are located on the main wire harness in front of the engine.
Page 19-28
2019 Carryall 550 Maintenance and Service Manual
GASOLINE VEHICLE - ELECTRICAL
COMPONENTS
Advertisement
Table of Contents
Troubleshooting
