Table of Contents
Advertisement
4
Electric Bed Lift
ELECTRIC BED LIFT
ELECTRIC BED LIFT REMOVAL
NOTE: For vehicles equipped with an electric bed lift.
This procedure requires the aid of an assistant.
1.
Disconnect the batteries. See Disconnect the Batteries – Electric Vehicles on page 1-5.
See Disconnect the Battery- Gasoline Vehicles on page 1-4.
2.
Raise the bed.
3.
Disconnect actuator wires.
4.
Remove actuator hardware that secures lift (7) (Figure 4-9, Page 4-19).
5.
Lower the bed.
6.
Remove the hex-head bolts, lock nuts, spacers and bushings (1, 2, 5, 6, 7, and 8) (Figure 4-10, Page 4-20).
ELECTRIC BED LIFT INSTALLATION
1.
Install hex-head bolts, lock nuts, spacers and bushings (1, 2, 5, 6, 7, and 8) (Figure 4-10, Page 4-20).
2.
Lift bed.
3.
Install actuator hardware that secures lift (7) (Figure 4-9, Page 4-19).
4.
Connect actuator wires.
5.
Lower bed.
6.
Connect the batteries. See Connect the Batteries – Electric Vehicles on page 1-5.
See Connect the Battery- Gasoline Vehicles on page 1-4.
Page 4-18
2019 Carryall 500 and 700 Maintenance and Service Manual
BODY AND TRIM
Advertisement
Table of Contents
Troubleshooting
