Requirements For The Mounting Location Of The Inverter; Permitted And Prohibited Inverter Mounting Positions - SMA COMMERCIAL STORAGE SOLUTION 30 System Manual

SMA Solar Technology AG
7.1.3

Requirements for the mounting location of the inverter

Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires. This can result in death or serious injury.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
☐ Do not mount the inverter in living areas
☐ The mounting location must be suitable for the weight and dimensions of the product.
☐ The mounting location must be inaccessible to children.
☐ The installation site can be exposed to direct solar irradiation. There is, however, the possibility that the product
reduces its power output to avoid overheating due to high temperatures.
☐ The mounting location should be freely and safely accessible at all times without the need for any auxiliary
equipment (such as scaffolding or lifting platforms). Non-fulfillment of these criteria may restrict servicing.
☐ All ambient conditions must be met.
7.1.4

Permitted and Prohibited Inverter Mounting Positions

☐ The product may only be mounted in a permitted position. This will ensure that no moisture can penetrate the
product.
☐ The product should be mounted such that the LED signals can be read off without difficulty.
90° ... 80°
0°
Figure 15: Permitted and prohibited mounting positions
System Manual
7 Mounting and Preparing the Connection
WARNING
ESSX-20-SH-en-10 45