Create New Pv System; Add Product To An Existing System - SMA COMMERCIAL STORAGE SOLUTION 30 System Manual

SMA Solar Technology AG
2. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
3. Select [Login].
9.6.4

Create new PV system

The system setup assistant is a step-by-step guide to the processes required for the registration of your system in
Sunny Portal.
Service access
To ensure the best service quality possible, activate the switch for service access during registration.
Requirements:
☐ You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.
☐ The product is in operation and connected to the local network via an Internet router.
☐ The operation LED is glowing green.
☐ An active Internet connection is established.
Procedure:
1. Log into Sunny Portal.
2. Select the menu Configuration.
3. Select [Create system] in the context menu.
☑ The system setup assistant opens.
9.6.5

Add product to an existing system

Requirement:
☐ You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.
☐ The product is in operation and connected to the local network via an Internet router.
☐ The operation LED is glowing green.
☐ An active Internet connection is established.
Procedure:
1. Log into Sunny Portal.
2. Select system.
3. Select the menu Configuration.
4. Select [Device management] in the context menu.
5. Select the button.
☑ The system setup assistant opens.
System Manual
9 Commissioning
ESSX-20-SH-en-10 101