Table of Contents
Advertisement
SMA Solar Technology AG
Procedure:
1. Open the web browser of your end device.
2. Enter the IP address of the product into the address bar and press the enter key.
Web browser displays warning
3.
After the access address of the product has been entered, a message might appear indicating that the
connection to the user interface of the product is not secure.
• Continue loading the user interface (scroll to bottom and click proceed/advance).
☑ The login page of the user interface opens.
Also see:
• Design of the User Interface ⇒ page 106
10.4.3 Direct connection via Wi-Fi
10.4.3.1 Information on Direct Connection via Wi-Fi
You have several options to connect the product to a smart device (smartphone, tablet, or laptop). The procedure can
be different depending on the devices. If the procedures described do not apply to your device, establish the direct
connection via Wi-Fi as described in the manual of your device.
The following connection options ar available:
• Connection via SMA 360° app (see Section 10.4.3.2, page 105)
• Connection via WPS (see Section 10.4.3.3, page 105)
• Connection via device-specific Wi-Fi password (WPA2-PSK) (see Section 10.4.3.4, page 106)
Also see:
• Design of the User Interface ⇒ page 106
10.4.3.2 Wi-Fi Connection via SMA 360° App
Requirements:
☐ A smart end device with camera must be available.
☐ The SMA 360° App must be installed on the smart device.
☐ An user account for Sunny Portal must already exist.
Procedure:
1. Activate the Wi-Fi access point of the inverter. To do this, tap on the enclosure lid of the inverter twice.
☑ The blue LED flashes slowly for approx. 2 minutes. The Wi-Fi access point is then activated for approx. 30
minutes. Once this period has expired, the Wi-Fi access point is deactivated automatically.
2. Open the SMA 360° App and login with the Sunny Portal account details.
3. Select QR-Code Scan in the menu.
4. Scan the QR Code on you product via the SMA 360° App.
☑ The smart device automatically connects to the product. The web browser of your smart device opens and
the login page of the user interface is displayed.
5. If the web browser of the smart end device does not open automatically and the login page of the user interface
is not displayed, open the web browser and enter http://smalogin.net in the address bar.
10.4.3.3 Wi-Fi Connection via WPS
Requirements:
☐ The smart device must have a WPS function.
System Manual
10 Operation
ESSX-20-SH-en-10
105
Advertisement
Table of Contents
