Changing An Energy Management Profile; Configuring The Battery; Modbus Function - SMA COMMERCIAL STORAGE SOLUTION 30 System Manual

SMA Solar Technology AG
• Overview of used energy management profiles ⇒ page 110

10.8.7 Changing an energy management profile

A single energy management profile cannot be deactivated, only changed.
Requirements:
☐ At least 1 energy management profile has already been created.
☐ The user interface is open and you are logged in.
Procedure:
1. Log into the user interface of the product.
2. Select the menu item Energy management in the menu Configuration.
3. In the row of the required energy management profile, select the
4. Select Activate profile.
Also see:
• Overview of used energy management profiles ⇒ page 110
10.9

Configuring the battery

You have the option to change the configuration of your battery or restart it at any time, e.g. when using a new
battery.
Requirement:
☐ The user interface is open and you are logged in.
Procedure:
1. Log into the user interface of the product.
2. Select the menu item Battery configuration in the menu Configuration.
3. Follow the installation assistant steps and carry out the configuration for your battery. For every setting made in a
step, click on [Next].
☑ When all settings are made, the inverter starts the communication connection with the battery.
☑ The user interface shows an overview of the current battery configuration.

10.10 Modbus function

The Modbus interface is deactivated by default. In addition, the communication port 502 is set.
To access SMA products with SMA Modbus
enabling the interface, the communication ports of both IP protocols can be changed.
System Manual
® ® ®
or SunSpec Modbus , the Modbus interface must be activated. After
button.
ESSX-20-SH-en-10
10 Operation
113