Table of Contents
Advertisement
SMA Solar Technology AG
4 Additionally Required Materials and Equipment
Material or equipment
Screws suitable for the inverter mounting
base
Washers suitable for the inverter mounting
base
Screw anchors suitable for the inverter mount-
ing base
Screws suitable for the battery cabinet mount-
ing base
Screw anchors suitable for the battery cabi-
net mounting base
Screws suitable for the temperature and hu-
midity sensor mounting base
Screw anchors suitable for the temperature
and humidity sensor mounting base
Field-assembly RJ45 connector with metal en-
closure
Means of transport (e.g., pallet truck or hand
truck)
Eye bolt (M10)
Hoist
Utility knife
Torx screwdriver (TX25)
Torx screwdriver (TX30)
Torx screwdriver (TX40)
Cross-head screwdriver (PH2)
Allen key (AF8)
Allen key (AF10)
3 Nm to 30 Nm torque wrench
10 mm and 13 mm socket
System Manual
4 Additionally Required Materials and Equipment
Quantity Explanation
4
For attaching the wall mounting bracket to the inverter
mounting base
4
For attaching the wall mounting bracket to the inverter
mounting base
4
For attaching the wall mounting bracket to the inverter
mounting base
2
For attaching the fixing brackets to the battery cabinet
mounting base
2
For attaching the fixing brackets to the battery cabinet
mounting base
2
For attaching the temperature and humidity sensor (max.
shaft 3 mm, head width 5 mm to 8 mm)
2
For attaching the temperature and humidity sensor (max.
shaft 3 mm, head width 5 mm to 8 mm)
1-2
Only required if the network cables for the inverter are
not equipped with RJ45 connectors
1
Used to transport packed components to the installation
site
2
Only required if the inverter is to be transported with a
hoist
1
Only required if the inverter is to be transported with a
hoist
1
Used to unpack the product
1
Used to attach and remove carrying handles on the in-
verter and to mount the battery
1
Used to mount the battery
1
Used to attach the mounting brackets, to attach the prod-
uct to the mounting brackets, to attach the connection
plate to the product, to connect additional grounding
1
Used to attach the battery modules and the battery man-
agement system in the battery cabinet
1
Used to connect the AC cables to the inverter
1
Used to attach and remove the cover of the inverter en-
closure
1
Used to tighten bolted connections
1
Example: For tightening grounding connections
ESSX-20-SH-en-10
27
Advertisement
Table of Contents
