Table of Contents
Advertisement
SMA Solar Technology AG
7.1.7
Requirements for the Battery Installation Site
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires. This can result in death or serious injury.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
☐ The mounting location must be suitable for the weight and dimensions of the product.
☐ The surface at the installation site must be sufficiently dry, horizontal and flat.
☐ The installation site can be exposed to direct solar irradiation.
☐ There must be no heat sources in the immediate vicinity of the installation site.
☐ All ambient conditions must be met.
☐ A homogeneous temperature distribution within the battery room must be guaranteed.
☐ The installation site must be less than 2000 m above mean sea level. If you would like to use the battery at
altitudes above 2000 m, contact Service.
☐ The installation site must be in a fire-protected room in accordance with IEC 62619. The fire-protected room must
be equipped with an independent fire alarm unit in accordance with local regulations and industry standards and
be free of fire loads. The room must be separated from other rooms by at least class T60 fire doors and class F60
fire walls.
☐ On flood plains, the installation site must be elevated and always protected from contact with water.
☐ The installation site must meet the requirements of the local fire protection regulations.
☐ During transport, the available height must always be greater than the tilt dimension of the battery cabinet.
7.1.8
Battery Cabinet Mounting Dimensions
Figure 18: Storage-30-20: Battery cabinet mounting dimensions
System Manual
7 Mounting and Preparing the Connection
WARNING
ESSX-20-SH-en-10
47
Advertisement
Table of Contents
