Table of Contents
Advertisement
10 Operation
3. Click on the profile you want.
☑ In the energy management profiles Maximum increased self-consumption and Sleep mode, the
selected energy management profile is activated automatically.
☑ In the energy management profile Peak load shaving, the page to set the parameters opens.
4. To use peak load shaving, set the parameters for the peak load shaving. Take the parameter description for peak
load shaving into account.
Also see:
• Home page of the energy management ⇒ page 109
• Overview of used energy management profiles ⇒ page 110
• Parameter description for peak load shaving ⇒ page 110
10.8.5 Deactivating the energy management
A single energy management profile cannot be deactivated, only changed. To deactivate the entire energy
management, proceed as described in this section.
Procedure:
1. Log into the user interface of the product.
2. Select the menu item Energy management in the menu Configuration.
3. Select the slider Activate energy management.
Also see:
• Overview of used energy management profiles ⇒ page 110
10.8.6 Activating the energy management
Requirements:
☐ A suitable energy meter is installed and configured at the point of interconnection within the system.
☐ At least 1 energy management profile has already been created.
☐ The user interface is open and you are logged in.
Procedure:
1. Select the menu item Energy management in the menu Configuration.
2. Select the slider Activate energy management.
3. If the required energy management profile is not activated, in the row of the energy management profile, select
the
button.
4. Select Activate profile.
Also see:
112
ESSX-20-SH-en-10
SMA Solar Technology AG
System Manual
Advertisement
Table of Contents
