Accessory Kit For Battery - SMA COMMERCIAL STORAGE SOLUTION 30 System Manual

3 Scope of Delivery
3.6

Accessory Kit for Battery

Check the scope of delivery for completeness and any externally visible damage. Contact the Service if the delivery is
incomplete or damaged. Never commission the battery if components are damaged.
Figure 5: Components included with accessory kit
Position Quantity
A 1
B 3 to 9
C 1
D 1
E 1
F 1
2)
The number of module connector sets supplied is determined by the number of battery modules: Number of battery modules - 1 = number
of module connector sets supplied
24 ESSX-20-SH-en-10
Designation
APU connector set for grounding the battery cabinet and for connecting the bat-
tery management system (APU) to the battery modules
Module connector set for wiring the battery modules in the battery cabinet
DC connector set for connecting the battery cabinet to the inverter
If using more than one battery cabinet, the DC connector set is used to connect
the battery cabinet to the superordinate DC distributor
Temperature and humidity sensor (model SD500 from Extech Instruments)
Switch
Battery room label
SMA Solar Technology AG
2)
System Manual