Table of Contents
Advertisement
10 Operation
Position
Designation
G
Dashboard
H
Home
10.6
Changing the Password
The password for the currently logged in user can be changed in the user interface of the product.
Procedure:
1. Open the user interface.
2. Log into the user interface.
3. Select the menu User settings.
4. Select [Personal data].
5. Click on [If you want to change your password, please click here].
6. To change the password, first enter the old password and then the new password repeatedly.
7. Click on [Save] to save the changes.
10.7
Country standard
The product is set to a generally valid country standard by default. While commissioning the product using the
installation assistant, a country standard appropriate for the installation site and intended purpose must be selected for
the product to start operating.
You can change the country standard via the user interface.
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a disturbance in the
PV system and lead to problems with the grid operator. When selecting the country data set, you must always
observe the locally applicable standards and directives as well as the properties of the PV system (e.g. PV system
size, grid-connection point).
• If you are not sure which standards and directives are valid for your country or purpose, contact the grid
operator.
Channel
Name
Country
Set the country stan-
dard
108
ESSX-20-SH-en-10
Description
Displays information and instantaneous values of the device or sys-
tem currently selected.
Opens the user interface home page
Group
Grid monitoring > Grid monitor-
ing
SMA Solar Technology AG
Settings
Selection of different country
data sets
System Manual
Advertisement
Table of Contents
