Table of Contents
Advertisement
SMA Solar Technology AG
12 Battery Monitoring Software
12.1
Menu Structure of the Battery Monitoring Software
Battery
Cells
Charging/Dis-
Cell Voltage
charging Capac-
ity
Battery voltage
Cell Temperature Clear Events
Charging/Dis-
SoC (Cell)
charging Current
Battery tempera-
SoH (Cell)
ture
Balancing Mode
Module Voltage
Charge Cycle
Charging/Dis-
(kWh)
charging Capac-
ity
Discharge Cycle
Temperature
(kWh)
DBO (DynamiX
Battery Opti-
mizer)
SoC (State of
-
Charge)
SoH (State of
-
Health)
Warning - Time
-
Temperature APU
-
(Battery Manage-
ment System)
12.2
Installing the Battery Monitoring Software
Requirements:
☐ A mobile end device (e.g., laptop) must be available as a service PC.
☐ A Microsoft Windows-based operating system must be installed on the service PC.
☐ The communication between the battery and battery inverter must be conducted via the supplied switch.
☐ The service PC must be connected to this switch.
☐
☐ The file containing the current BatMon battery monitoring software must be available. The battery monitoring
software is available for download on the product page at www.SMA-Solar.com.
10)
This parameter has a direct impact on the battery and is exclusively reserved for certified professionals. Therefore, it is password-
protected. The password can be requested directly from Service.
System Manual
Events
Parameter
Event Logbook
Battery parame-
ters
Load Default
Save Events
Save Default
-
Reset APU
-
-
-
-
-
-
-
-
-
-
Data Displayed
Expert Settings
Only with
Password
12 Battery Monitoring Software
System
Current Faults
Version BatMon
Expert Level
10)
10)
10)
10)
Start Logging
Firmware
10)
Download
Communication
10)
Port
-
-
-
10)
Functions
-
10)
ESSX-20-SH-en-10
Select
Master
Slave
-
-
-
-
-
-
-
-
-
123
Advertisement
Table of Contents
