Symbols On The Inverter - SMA COMMERCIAL STORAGE SOLUTION 30 System Manual

SMA Solar Technology AG
LED signal
The blue LED is glowing
Blue LED is off
All 3 LEDs are on
5.6

Symbols on the Inverter

Icon Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally grounded if additional grounding
or equipotential bonding is required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Danger to life due to high voltages in the inverter; observe a waiting time of 5 minutes.
5 min
High voltages that can cause lethal electric shocks are present in the live components of the
inverter.
Prior to performing any work on the inverter, disconnect it from all voltage sources as de-
scribed in this document.
Observe the documentations
Observe all documentations supplied with the product.
Inverter
Together with the green LED, this symbol indicates the operating state of the inverter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network connection.
Three-phase alternating current with neutral conductor
Direct current
The product has no galvanic isolation.
WEEE designation
Do not dispose of the product together with the household waste but in accordance with the
disposal regulations for electronic waste applicable at the installation site.
System Manual
Explanation
There is an active connection with a local network (Ethernet/Wi-Fi) or there is a
direct connection (Ethernet/Wi-Fi) with an end device (e.g. computer, tablet PC
or smartphone).
There is no active connection.
Inverter update or booting procedure
5 Product Overview
ESSX-20-SH-en-10 35