Figure 4.10 Chinese Input Interface - Rigol DG900 Pro Series User Manual

6. Modify or delete the unwanted characters that have been input
During the name input process, you can modify or delete the unwanted
character if necessary. To delete the characters that have been input, click or
tap the "Back" key in the virtual keypad. To modify the characters that have
been input, delete the unwanted characters first and then input the new
characters.
You can directly move the cursor to the character to be modified or deleted,
delete the desired character or input the new characters after deleting the
unwanted character.
7. Confirm the input
After completing the input operation, click or tap "Enter".
• Input Chinese Characters
1. Select the Chinese input method
First check the input method type. If it shows "中/En", then go to Step 2; if it
shows "En/中", click or tap the input method switchover key to switch to
"中/En" (Chinese input method).
2. Clear the name input area
If there is no character in the "Input Area", please go to the next step. If there
are characters in the "Input Area", click or tap the "Back" key to delete all the
characters from the "Input Area" in order.
3. Input Chinese characters
Click or tap the virtual keypad to input Pinyin into the input area, then the
characters to be selected will be displayed in the "Chinese Character Selection
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Input Area Chinese Character Selection Area

Figure 4.10 Chinese Input Interface

Quick Start
DG900 Pro User Guide
25