Configuring The F.control Auxiliary Function - Burkert 8750 Quick Start Manual

Start-up24VDC
Procedure:
Taste Action
MENU MENU
Press for 3 s
(countdown in the
display)
/ Select X.TUNE
MENU RUN
Press for 5 s
(countdown in the
display)
Press any key
MENU EXIT
EXIT
MENU
Press
Tab. 18: Setting the input signal
You must exit the main menu by pressing the left selection
key EXIT before the modified data is saved to the
MENU
memory (EEPROM). During the save process, the save symbol
is indicated on the display.
„TUNE err/break" if a fault occurs.
8)
Typ 8750
Description
Switching from
process level setting level
Selection X.TUNE menu
Start of the automatic adjustment
X.TUNE
Messages on the progress of the
X.TUNE on the display:
„TUNE #1...."-„X.TUNE READY"
Exit X.TUNE menu
Switching from
setting level process level
11.4 Configuring the F.CONTROL auxiliary
function
→
Add the auxiliary function F.CONTROL to the main menu using
the configuration menu (ADDFUNCTION).
Procedure:
Key Action
MENU MENU
Press
/ Select ADD.FUNCTION
ENTER
MENU
Press
/ Select F.CONTROL
8)
ENTER
MENU
Press
EXIT
MENU
Press
The F.CONTROL function is now activated and incorporated into
the main menu (MAIN).
Tab. 19: Incorporating F.CONTROL into the main menu (MAIN)
→
Enter the basic settings for the flow controller under F.CONTROL.
for approx. 3 s
english
29