. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
Installing Hardware Options
5. Grasp the expansion backplane brace at both ends and pull it out of the
server chassis. Use care when guiding the assembly out of the unit to
prevent damaging the boards.
Figure 3-4. Removing the expansion backplane brace
Removing an Expansion Slot Cover
To install a PCI or an ISA expansion board, complete the following steps:
1. Locate the correct vacant slot in the expansion board.
Writer: Compaq Computer Corporation Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/14/97 11:21 AM