Removing The Front Bezel - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-4.

Removing the Front Bezel

To gain access to the hard drive and removable media, remove the front bezel:
1. Remove the side access panel.
2. Release the three snaps that hold the bezel in place; two are located on
the side of the bezel and one at the bottom.
3. Rotate the bezel out to about 45 degrees, then pull to remove the bezel
from the chassis.
Writer: Project: Compaq ProSignia 200 Features Comments:
Securing the system with a user-supplied padlock
File Name: C-ch1.doc Last Saved On: 4/14/97 11:03 AM
Compaq ProSignia 200 Server Reference Guide
1-5