Replacing The Expansion Backplane Brace - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8 Installing Hardware Options
2. Replace the screw at the side of the expansion slot.
Figure 3-6. Sliding an expansion board into the expansion slot
3. Replace the expansion board cage into the server chassis.

Replacing the Expansion Backplane Brace

1. Grasp the expansion backplane brace at both ends and push it into the
server chassis. Use care when guiding the assembly into the unit to
prevent damaging the boards.
Writer: Compaq Computer Corporation Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/14/97 11:21 AM