Installing Or Removing An Expansion Card; Removing An Expansion Slot Cover - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual

Installing or
Removing an
Expansion Card

Removing an Expansion Slot Cover

2-18 Upgrading the Compaq Deskpro EP Series
Your computer contains expansion slots, as shown in the
"Internal Components" section of this chapter.
1. Shut down the operating system properly, then turn off the
computer and any external devices, then disconnect the
power cord from the power outlet.
2. Remove the computer access panel and locate the correct
vacant slot in the computer chassis.
3. Remove the screw securing the slot cover, then remove the
expansion slot cover from the slot as illustrated.
Removing the Screw and Expansion Slot Cover