. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-9
5. When you no longer wish to use the feature, turn the server off and set
switch 1 on SW2 to the off/open position.
6. Replace the side access panel and turn on the server.
The following figure illustrates the diskette boot override switch.
Figure 6- 2. Diskette boot override switch
Serial/Parallel Interface Control
These control features enable and disable the serial and parallel interfaces.
Disabling the serial and parallel interfaces prevents data from being
transferred through these interfaces.
Compaq ProSignia 200 Server Reference Guide
Writer: Compaq Computer Corporation Project: Using Security Management Comments:
File Name: H-ch6.doc Last Saved On: 4/14/97 11:56 AM