Compaq ProSignia 200 Manual page 172

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-6 Installing a New Battery
Figure A-4. Installing a battery on the brace chassis
3. Remove the backing from the adhesive on the hook-and-loop fastener
strip. Place the battery and the hook-and-loop fastener strip as shown in
the following illustration.
Figure A-5.
4. Replace the server cover.
5. Place the sticker included with your battery kit on the back of your
server above the power connector.
Writer: COMPAQ Project: Installing a New Battery Comments:
Installing a battery on the riser board
File Name: K-appa.doc Last Saved On: 4/14/97 1:43 PM