Installing The Processor - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Release the original processor from the socket by
on the ZIF socket out and upward.
4. Lift the processor out of the socket
Figure 3-11. Releasing the ZIF socket and removing the processor

Installing the Processor

1. Align the processor with the ZIF socket.
2. Install the thermal pad first, then install the processor by lowering it into
the ZIF socket.
Writer: Compaq Computer Corporation Project: Installing Hardware Options Comments:
CAUTION:
The handle on the ZIF socket in your server may not be
identical to the handle shown in the drawing. All handle types perform the
same function.
CAUTION:
The thermal pad must be installed or damage will occur to
your processor.
File Name: E-ch3.doc Last Saved On: 4/14/97 11:21 AM
pulling the handle
.
Compaq ProSignia 200 Server Reference Guide
3-13