Installing A Processor Upgrade In Your Prosignia 200 Server; Removing The System Board Tray - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10 Installing Hardware Options
Installing a Processor Upgrade in
Your ProSignia 200 Server
To replace the installed processor with an upgrade processor, complete the
following steps:
1. Remove the system board tray.
2. Remove the processor.
3. Install the processor upgrade.

Removing the System Board Tray

!
The slide-out system board tray allows you to quickly remove the system
board, without using tools.
Writer: Compaq Computer Corporation Project: Installing Hardware Options Comments:
CAUTION:
Installing the processor upgrade incorrectly may cause
damage to the processor board. Compaq recommends that you have a
Compaq Authorized Reseller or Service Provider install the processor
upgrade. If you plan to install it yourself, read all the instructions carefully
before you begin.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow
the internal system components to cool before touching.
File Name: E-ch3.doc Last Saved On: 4/14/97 11:21 AM