Sco Openserver And Sco Unixware Device Drivers From Compaq - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-14 Using the System Configuration Utility
Manual installation
If you choose not to let SmartStart install the operating system, follow this
procedure:
1. Insert the Compaq SmartStart and Support Software CD into the
CD-ROM drive.
2. Boot your system.
3. Select Manual Installation.
4. Follow the instructions that display on the monitor.
SCO OpenServer and SCO UnixWare
Device Drivers from Compaq
Your server must have certain device drivers to operate under the SCO
OpenServer and SCO UnixWare 2 operating systems. These drivers are
located on the Compaq SmartStart and Support Software CD. There are three
methods to install the SCO operating system onto your server:
1. An integrated SmartStart installation is available to assist you with
installation of your server by automatically creating the Compaq System
Partition with tools to help configure and diagnose your server. The
SmartStart CD also includes all the SCO UNIX device drivers for
your system.
2. Alternatively, by booting the SmartStart CD and choosing a manual
installation path, you can use the SCO UNIX from Compaq CDs to install
your SCO software. This will also automatically install all the drivers
your server needs while presenting the more familiar SCO interview
process instead of the SmartStart interview process. It will also
automatically create the Compaq System Partition with tools to help
configure and diagnose your server.
Writer: Compaq Computer Corporation Project: Using the System Configuration Utility Comments:
File Name: F-ch4.doc Last Saved On: 4/14/97 11:43 AM