System Configuration Menu - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4 Using the System Configuration Utility
System Configuration - Takes you through the configuration process
step-by-step. Select the System Configuration option when a
configuration change is required. For example, select this option when
adding, replacing, or removing expansion boards, or adding a diskette
drive or a hard drive.
IMPORTANT:
ISA Plug and Play boards.
Operating System Installation - Allows you to install one of the
operating systems listed or to specify installation of an operating
system that is not listed.
Diagnostics and Utilities - Tests and inspects the computer.
Exit from this Utility - Restarts the computer.

System Configuration Menu

The following options are available from the System Configuration
Utility menu:
Configure Hardware
Power-On Defaults
System Partition
Configuration Backup
Configuring Hardware
When you select the Configure Hardware menu, a screen with five steps
displays. Following is a brief explanation of each step.
Writer: Compaq Computer Corporation Project: Using the System Configuration Utility Comments:
You must run the Compaq System Configuration Utility after adding
File Name: F-ch4.doc Last Saved On: 4/14/97 11:43 AM