Battery Placement On Riser Board - Compaq ProSignia 200 Manual
Hide thumbs
Also See for ProSignia 200:
- Integration notes (18 pages) ,
- Safety information manual (204 pages) ,
- Reference manual (198 pages)
Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-5
Battery Placement on Riser Board
1. Connect the new battery to the E2 battery header connector.
Figure A-2. Connecting the battery
2. Change the jumper at battery connect header E1 from the pin 1-2 to
pin 2-3.
Figure A-3.
Connecting the battery jumper on the riser board
NOTE :
When the jumper is placed at E1 / 1-2 on the riser board, the internal
battery is used. When the jumper is placed at E1 / 2-3, the external battery is used.
Compaq ProSignia 200 Server Reference Guide
Writer: COMPAQ Project: Installing a New Battery Comments:
File Name: K-appa.doc Last Saved On: 4/14/97 1:43 PM
Advertisement
Table of Contents
