Removing an Expansion Slot Cover
To remove an expansion slot cover, follow these steps:
1.
Remove the expansion board bracket from the workstation chassis.
2.
See the following illustration to remove an expansion slot cover.
Figure 10-2. Removing the screw and expansion slot cover
NOTE: To replace an expansion slot cover, reverse the above procedure.
Writer: Clifton Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: K-CH10.DOC Last Saved On: 12/14/98 1:37 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Professional Workstation AP400 Reference Guide
10-3