Opening The Tray Manually - Compaq ProSignia 200 Manual
Hide thumbs
Also See for ProSignia 200:
- Integration notes (18 pages) ,
- Safety information manual (204 pages) ,
- Reference manual (198 pages)
Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4
Using the CD-ROM Drive
Opening the Tray Manually
CAUTION:
server.
If the tray will not open automatically, you can open it manually by using the
emergency eject button.
Certain applications or operating system software may disable the eject button
to prevent accidental damage to the disk. If the eject button is disabled by the
application software, it will not operate.
1. Insert a thin metal rod, such as a straightened paper clip, into the
emergency eject hole and push firmly.
Figure 5- 3. Opening the CD-ROM tray manually
2. Slowly pull the tray out from the drive until the tray is fully extended,
then remove the disk.
Writer: Compaq Computer Corporation Project: Using the CD-ROM Drive Comments:
Before beginning this procedure, turn off the power to your
File Name: G-ch5.doc Last Saved On: 1/28/97 1:29 PM
Advertisement
Table of Contents
