Installing Or Removing An Expansion Card; Removing An Expansion Slot Cover - Compaq Deskpro ap230 Hardware Reference Manual

Installing or Removing an Expansion Card

Removing an Expansion Slot Cover

2-14 Hardware Upgrades
Your computer contains expansion slots, as shown in the "Internal
Components" section of this chapter.
1. Shut down the operating system properly, then turn off the
computer and any external devices, then disconnect the power cord
from the power outlet.
2. Remove the computer access panel and locate the correct vacant
slot in the computer chassis.
3. Remove the screw securing the slot cover, then remove the
expansion slot cover from the slot as illustrated.
Removing the Screw and Expansion Slot Cover