Removing The Side Access Panel - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-4 Installing the Server

Removing the Side Access Panel

Writer: Compaq Computer Corporation Project: Installing the Server Comments:
Mouse
Power cord
In addition to these supplied items, you may need:
T-15 Torx screw driver
Options to be installed
Application software diskettes
Optional uninterruptible power supply (UPS)
To remove the side access panel:
1. If the computer is on, turn it off and disconnect the power cord.
2. Disconnect any other external equipment connected to the computer.
3. Loosen the three thumbscrews on the rear of the unit.
4. Slide the side access panel toward the rear of the unit. See Figure E-1.
File Name: O-appe.doc Last Saved On: 4/14/97 1:51 PM