1.1. Battery Installation
The instrument accepts two AA or LR6 alkaline batteries.
1
4
To change the batteries:
1. Press the tab of the battery compartment cover and lift it clear.
2. Remove the battery compartment cover.
3. Insert the new batteries, ensuring correct polarity.
4. Close the battery compartment cover; ensuring it is completely and correctly closed.
1.2. Instrument Front Panel
1
2
3
4
5
6
6
1. GETTING STARTED
2
1. Non-skid pads
3
2. "Tear-drop" notch to hang
3. Battery compartment cover
4. Magnets for mounting to a
1. Temperature and humidity sensors
2. LCD display
7
3. MODE/temperature units button
4. Backlight/ECO mode button
5. Record button
6. ON/OFF button
7. CO
sensor
2
8. Activate/deactivate buzzer
8
9. HOLD/Bluetooth enable/disable
button
10. MAX/MIN button
9
10
instrument
metallic surface
Air Quality Meter Model 1510