Pairing The Instrument To The Computer; Connecting The Instrument With The Control Panel - AEMC 6526 User Manual

4.3.2 Pairing the Instrument to the Computer

1. Open the Bluetooth Devices dialog on your computer to pair the instrument with your computer. Different
operating systems have different steps for opening this dialog, so consult your computer's documentation for
instructions.
2. Once the dialog is displayed, click Add a Device. A dialog box appears listing the locally available Bluetooth
devices. There may be several devices of varying types listed, depending on the location of your computer.
3. Find the instrument's Bluetooth name, and click it.
4. You are prompted to enter a pairing code; enter 1111.
5. After you enter the code, click Next. A screen appears informing you that the instrument has been successfully
connected with the computer. Click Close to exit the screen.
To view real-time data in the DataView Control Panel, the instrument dial must be turned to the appropriate
measurement range.

4.3.3 Connecting the Instrument with the Control Panel

When the computer is Bluetooth-ready, you can connect to the instrument as follows:
1. Open the Megohmmeter Control Panel. In the menu bar at the top of the screen, select Help. In the drop-down
menu that appears, click the option Help Topics. This opens the Megohmmeter Control Panel Help system.
2. Use the Contents window in the Help system to locate and open the topic "Connecting to an Instrument." This
topic provides instructions explaining how to connect your instrument to the computer.
3. After the instrument is successfully connected, consult the Control Panel Help system for instructions about
viewing real-time data, downloading and viewing recorded sessions, creating DataView reports from the
downloaded data, and configuring the instrument through the Control Panel.
Megohmmeter Model 6526/6532/6534
1.800.561.8187
www. .com
information@itm.com
39