Charging/Recharging The Battery - AEMC 6250 User Manual

9.3

Charging/Recharging the Battery

AC POWER SELECTION
The Model 6250 may be recharged from 90 to 264V
instrument includes a 110V line cord, which provides the charging voltage
for the rechargeable battery.
CHARGING THE BATTERY
The Model 6250 should be charged to a full charge before using it for the
first time. Charging to full capacity may take up to 6 hours for a completely
discharged battery
If the battery symbol
The battery will charge in both the ON and OFF mode.
• In the ON mode, the charging indicators will show on the display.
• In the OFF mode, no display will show during charging.
Connect the Model 6250 to 120V
ing starts automatically).
NOTE: Testing can not be conducted while charging the batteries. Button
presses are ignored when charging is in process.
CHARGING INDICATORS
• bAt on the small display and CHrg on the main display, signifies
fast charging in progress.
bAt on the small display and CHrg flashing on the main display,
•
signifies slow charging (starts off with fast charge, temperature
conditions permitting).
bAt on the small display and FULL on the main display, signifies
•
that charging is complete.
If the instrument is turned on and the battery voltage is >5V, then the
normal use of the device is permitted.
58
0.561.8187
is flashing, the battery needs to be recharged.
using the power cord provided (charg-
AC
www. .com
(45 to 420Hz). The
AC
Micro-Ohmmeter Model 6250
information@itm.