Function Check - JLG ES1932 Operation & Safety Manual

User Responsibilities, Machine Preparation, and Inspection
2. Ground Controls – Placard secure and legible, control switches return to neutral
position when activated and released, emergency stop switch functions properly.
Control markings legible.
3. Hydraulic Pump/Motor, Control Valve Installation – No unsupported wires or
hoses; no damaged or broken wires. See Inspection Note.
4. Front Wheels, Tires, Drive Motor, Steer Linkage, and Steer Cylinder – Wheel
bolts properly secured. (refer to wheel and tire information section). See
Inspection Note.
5. Battery Compartment – See Inspection Note.
6. Rear Wheels and Tires – Wheel bolts properly secured (refer to wheel and tire
information in
corrosion, check hydraulic brake hoses for damage or leakage. See Inspection
Note.
7. Manual Descent Control – See Inspection Note.
8. Beacon(s) (If Equipped) – See Inspection Note.
9. Scissor Arms, Pivot Pins, Sliding Wear Pads, Lift Cylinder – See Inspection
Note.
10. Platform/Rail Gate Assembly – Deck extension slides in and out and locks in
place properly. Gate closes properly. All fold-down rail pins (if equipped) in place
and secure. See Inspection Note.
11. Platform Control Console – Ensure that the control console is firmly secured in
the proper location. Placards secure and legible, control lever and switches return
to neutral when activated and released, and emergency stop switch function
properly, required manuals in storage box.
12. Static Strap – See Inspection Note.
2.5

FUNCTION CHECK

Perform the Function Check as follows:
32
Section — Operator
31221541
Maintenance). Inspect wheels for damage and
ES1932, ES1932i