Accessories
5.8
PANEL CARRIER
The Panel Carrier can transport flat sheets or panels to an elevated site by positioning
them in a channel on the outside of the platform. It consists of a carrier tray that runs
parallel to the length of the platform and an adjustable bracket mounted to the handrail
to hold material in place.
The panels can measure up to 4 ft x 8 ft (1.22 m x 2.4 m), or approximately 32 ft sq. (3 m
sq.).
Note: This accessory is rated for INDOOR USE only. INDOOR USE is use in areas
shielded from wind so that there is no wind.
1. Adjustable Bracket
5.8.1
Safety Precautions
Multiple material-handling accessories can be installed but only one may be loaded
at a time unless approved by JLG Industries, Inc.
This accessory affects the overall platform capacity. Refer to the capacity decal and
adjust accordingly.
78
2. Capacity Decal (on back)
WARNING
WARNING
31221541
3. Carrier Tray
ES1932, ES1932i